See the New Products @ SupplyLevel Inc.
$ 60.00 CUTOUT, TYPE L 27KV 100AMP 125KVBIL 8KA
NEW – CUTOUT, TYPE L 27KV 100AMP 125KVBIL 8KA
Cooper Power Systems has set a new standard of excellence for polymer distribution cutouts with the introduction of UltraSIL polymerinsulated interchangeable cutouts. Our premium UltraSIL polymerinsulated cutout incorporates an industry recognized silicone rubber insulating material with superior hydrophobic qualities. Cooper Power Systems offers Type L cutouts in both polymer and porcelain designs, which provide reliable overcurrent protection for primary distribution circuits. Overcurrent protection s afeguards an electric system from excessive currents produced by abnormal conditions such as faults, line or equipment overloads, or equipment failures. Polymer and porcelain Type L cutouts are ruggedly constructed and will provide full range overcurrent protection from minimum melt of a given fuse link to the maximum nameplate interrupting current rating of the cutout.
$ 24.00 PAINT, TRIG-A-CAP RED-BVS (case of 12)
$ 14.00 Rod, 48″ Fibre Guy Strain Rod Clevis-Clevis
NEW – Fibre Glass Rod Guy Strain Clevis at Both ends
• Combines a fiberglass guy strain insulator
• Strength rating meets or exceeds steel strand rated breaking strength 15,000 lbs.
• Tested for torsion and tension in both elevated and ambient temperatures
• Improves insulation values of strain guys with clevis at both ends
$ 7.00 Pin Type, Tie-Top Insulator Type
NEW – PIN TYPE, TIE TOP Insulator 15kV
• Pin Type, Tie-Top: Insulator Type – Pin Type, Tie Top;
• Material – Porcelain; Voltage (kV) – 15.0;
• Pinhole Diameter (in) – 1.00;
• Impulse Flashover, +/- kV – 130/150;
• Frequency Flashover, Dry/Wet kV – 80/45;
• Diameter x Height – 4.88×7.00″;
• Strength (lb) – 3000; ANSI Class – 55-5
$ 4.00 Photo Cell Electomech 7760EPS
$ 6.00 Ground Rod – Copper Clad 5/8″ x 8′
$ 101.00 Fuse Hinge Style 15.5 kV 25 amp FA3A25
$ 0.50 One hole Lug #2 STR for 3/8″ Bolt AL238TN
$ 55.23 Steel Crossarm K7-1 5′-6″ x 4″ 55 lbs.
$ 115.50 Steel Crossarm K7-7 7′-6″ x 4″ 90 lbs.
$ 1.89 BOLT THRU 3/4″ X 10″ K308-10
$ 2.00 BOLT THRU 3/4″ X 12″ K308-12
$ 2.14 BOLT THRU 3/4″ X 14″ K308-14
$ 2.71 BOLT THRU 3/4″ X 18″ K308-18
$ 2.35 BOLT THRU 3/4″ X 16″ K308-16
$ 2.97 BOLT THRU 3/4″ X 20″ K308-20
$ 195.00 AlPex 5/8″ White Tubing 300′
$ 170.00 AlPex 1/2″ White Tubing 300′
$ 99.00 3kV MOVE Elbow Arrester 28kV Interface #3238019C03M
$ 1.11 BOLT THRU 5/8″ X 10″ K307-10
$ 1.22 BOLT THRU 5/8″ X 12″ K307-12
$ 1.38 BOLT THRU 5/8″ X 14″ K307-14
$ 1.54 BOLT THRU 5/8″ X 16″ K307-16
$ 2.17 BOLT THRU 5/8″ X 18″ K307-18
$ 2.34 BOLT THRU 5/8″ X 20″ K307-20
$ 1.46 BOLT THRU 3/4″ X 6″ K308-6
$ 1.69 BOLT THRU 3/4″ X 8″ K308-8
$ 0.95 BOLT THRU 5/8″ X 6″ K307-6
$ 0.00 Safety Performance Audit Services
$ 445.98 1000W Peak Power, 900W Running Power
$ 595.98 2200W Peak Power, 2000W Running Power
$ 545.00 Automatic tankless water heater – Vent Required
$ 658.00 Automatic tankless water heater – Turbo Vent
$ 1.13 BOLT THRU 5/8″ X 8″ K307-8
$ 10.20 Cable Adapter Cooper Power CA625J-BVS
NEW – Hot-Dip Galvanized Bolt 7″ x 1/2″ 4″ thread
Square Head and Square Nut
• Roll threaded.
• Bolts 1/2-inch and larger in diameter and 7-inch and longer in length also have cone points which permit driving without damage to the threads.
• See Specifications
$ 62.00 Fuse Clip Style Fuse 15.5 kV FA4H40
$ 24.00 Guy Attachment Pole Band Maclean J6644
$ 2.55 Guy Attachment Joslyn Thimbleye 5/8″ J8152
$ 0.45 Bolts 1/2-inch diameter and 7-inch length J8707
$ 0.25 Sleeve Non-tension #2STR – GLE2 or AL2TN
NEW – Non-Tension Sleeve #2 STR GLE2 or AL2TN
The Homac Connector GLE2 and the T&B Connector AL2TN for Die #’s TQ, 45, 348, 6A, 1/2
N
